| MINERAL
PULVERISING MILLS PVT. LTD. |
|
SANDIRON |
|
| Description:
Sandiron is a pre-blend of high quality Bentonite & lustrous carbon producing Carbonaceous Additives, for use as clay binder as well as carbonaceous additive for improving casting surface finish in green sand molding systems in foundries. |
|
| Functions: Pre-blends of Bentonite & lustrous carbon producers are preferred modes of dosing both these essential additives in a single measure in the green sand molding process in foundries. Pre-blends are specially preferred by those foundries where castings of near standard configuration and sand to metal ratios are cast in foundries having highly automated molding lines and sand plants. Pre-blends such as SANDIRON, while imparting ease of use as single dose additives, require careful monitoring where frequent changes of patterns are necessitated. Here a close working relationship between the pre-blend manufacture & the user foundry is recommended. |
|
Advantages
Acts as a single shot additive for both green strength and surface
finish.
High green compression strength.
Excellent peel of sand.
Good anti scabbing properties.
Can also be used for non-ferrous castings, like copper based alloys. |
|
| Packing & Storage SANDIRON is packed in 50 kg HDPE Bags and should be stored in moisture free, covered conditions. |
|
| For Further Information
on SANDIRON
General Specifications
Suggested sequence of additions
Tailor-made solutions by SANDIRON to suit your quality
parameters. For any further questions or product application information, we are at your service. |
|
M-22,
M.I.D.C., HINGNA INDUSTRIAL AREA , NAGPUR 440 016 , INDIA Ph: 91 712 232401/232402/237065, Fax: 91 712 237223 (Email : info@mpmindia.com) |
|