| MINERAL
PULVERISING MILLS PVT. LTD. |
REFEX |
| |
| REFEX
is a range of Solvent based, ready to use coatings for
application on resin bonded and silicate cores / moulds. |
| |
Application:
REFEX is suitable for cores / moulds produced synthetic
binder systems, Sodium Silicate systems as well as Bentonite
Bonded Systems.
REFEX range of coatings, find application in Grey Cast
iron, Ductile iron, Steel, and Non Ferrous castings.
Coating can be applied by dipping, brushing, or spraying.
REFEX is formulated to resist hot cracks, Metal Penetration
& Burn-On. |
| |
After
Treatment:
Ignite the moulds or core immediately after coating application
or dry by hot air or blower. |
| |
Handling:
REFEX range of coatings contains inflammable solvents
and therefore should be handled and stored with care.
REFEX has a shelf life of 60 Days if stored in cool and
dry place. |
| |
Precautions:
While coating by dipping application ensure clean dip
tank.
Keep away from direct Sunlight, heat and flames. |
| |
| Product |
Color |
Filler |
Application |
REFEX–G |
Black
|
Graphite |
Grey with Iron, SG Iron, non
ferrous casting |
REFEX–Z |
Beige |
Zircon Silicate |
Thick castings of Iron &
Steel |
REFEX–ZS |
Beige |
Zircon Silicate, Mixed Refractory |
All Cast & Sg Iron Casting.
Thin section Steel Casting |
REFEX–GZ |
Red |
Zircon Silicate, Graphite |
All Cast & Sg Iron Casting |
| REFEX–AG
REFEX–A |
Grey
Rusty |
Aluminium silicates Graphite
Aluminium silicates |
Thin walled Cast & SG Iron
Medium sized cores of Cast & SG Iron
|
REFEX–M |
Creamy |
Magnestie |
Manganese Steel Castings |
|
| |
| NOTE:
All information provided in this sheet is to the best
of our present knowledge. No warranties or guarantee of
any type or extent are intended or implied and the company
accepts no liability for any loses or damages, consequential
or otherwise. Any claim arising out of use of the product
will be limited to replacement of material only. |
| |
|
M-22,
M.I.D.C., HINGNA INDUSTRIAL AREA , NAGPUR 440 016 ,
INDIA
Ph: 91 712 232401/232402/237065, Fax: 91 712 237223
(Email : info@mpmindia.com) |