| MINERAL
PULVERISING MILLS PVT. LTD. |
LUSTRON |
| |
| “Lustron”
is a range of tailor made Lustrous Carbon
Additive for use in green sand moulding in Ferrous Foundries,
for imparting bettr Surface Finish on Castings. |
| |
| Lustron is a proprietary
blend of carefully selected 7 scientifically evaluated
lustrous carbon carrying carbonaceous additives and anti-scabbing
agents. |
| |
| Specifications
|
Lustron-F
|
Lustron-Premium
|
Lustron-HPL |
| Volatile
Matter |
55-60% |
50-55% |
42-48% |
| Ash Content |
4.5% |
3.5% |
5% |
| Fixed Carbon |
By Difference |
By Difference |
By Difference |
|
| |
| Today “Lustron”
is no longer just a product. It is the experience
of using a Brand which when delivered to the customer,
is backed by: |
Research of the requirement the customer’s
Sand System.
Knowledge of its introduction & application
in the Sand Preparation & Molding Process.
Experience of the Green Sand System & the
faces acting in, on & around it, that makes for good
casting finish.
Proven Track Record of 20 years of ‘on-site’,
‘on-line’ application in virtually all types,
dimension & configuration of engineering & automotive
Castings in SG Iron & Grey Iron. |
| |
Advantages
Improved sand peel off from the casting
Improved Surface Finish
Reduced consumption of shots
Reduced Fettling
Reduced sand related casting defects
Reduced Man-hours on pre-dispatch casting preparation
faster turn-around
Reduced variables in sand Control = Standardization
of the sand molding process = (consistent reproducible
results) |
| For further details
on general guidelines on the use & application of
Lustrons as well as health & safety data sheets, please
write/email/call us for prompt attention to your requirements. |
| |
|
M-22,
M.I.D.C., HINGNA INDUSTRIAL AREA , NAGPUR 440 016 ,
INDIA
Ph: 91 712 232401/232402/237065, Fax: 91 712 237223
(Email : info@mpmindia.com) |