| MINERAL
PULVERISING MILLS PVT. LTD. |
Ferro
Silicon Magnesium |
| |
Introduction
Nodulizers impart soundness in microstructure and make castings more reliable
in as cast conditions. Homogeneity and lesser segregation can be achieved if
the nodulizers are of very good quality.
By introducing some trace elements such as Ca, Ba, Bi, Sb nodulizers can impart
different properties to castings. |
| |
Function
Correct combination of all elements can lead to
soundness in microstructure with homogeneous composition
and lower MgO content. They give stable and everlasting
microstructure with high absorption of Mg. |
| |
Specification:
| ELEMENT |
MPM6
|
MPM9
|
| Mg |
6.0 to 6.50 % |
9 to 9.50 % |
| RE |
1.8 to 2.2 % |
2.3 to 2.80 % |
| Ca |
2.3 to 3.0 % |
2.3 to 2.80 % |
| Si |
44 to 50 % |
44 to 50 % |
| Al |
1.0 % max |
1.0 % max |
|
| SIZES
: 5-10 mm, 5-20 mm, 5-25 mm |
| |
| The above are standard.
Besides this Barium & Bismuth doped nodulizers are
also available on request. |
| |
|
M-22,
M.I.D.C., HINGNA INDUSTRIAL AREA , NAGPUR 440 016 ,
INDIA
Ph: 91 712 232401/232402/237065, Fax: 91 712 237223
(Email : info@mpmindia.com) |