| MINERAL
PULVERISING MILLS PVT. LTD. |
Ferro
Alloys |
| |
Introduction
Ferro Alloy additions either directly or in Cored Wires are extremely critical
in foundry industry and steel making. Controlled chemistry and correct sizing
enable consistency in quality, of castings and steel. The imperative therefore
lies in indentifying such sources of Ferro Alloys, where quality, reliability
and delivery can be dependable. |
| |
Fe
Si Lumps
| Element |
Standard Specifications
|
| Si |
70-75 % |
| Al |
1.50 % Max |
| C |
0.20 % Max |
| P |
0.02 % Max |
| S |
0.02 % Max |
| Size |
25 mm to 150 mm and sizes within on request such
as 50-100 mm. |
Further, FeSi granules are available in various sizes such as 1-3 mm, 3-8 mm,
4-10 mm and on request. |
| |
Silico-Manganese
| Element |
Standard Specifications
|
| Mn |
60-65 % |
| Si |
14-17 % |
| C |
2.50 % Max |
| P |
0.35 % Max |
| S |
0.030 % Max |
| Size |
10-50 mm, 25 to 150 mm. Other sizes are also
available on request |
|
| |
High
Carbon Ferro Manganese
| Element |
Standard Specifications
|
| Mn |
70-75 % |
| C |
6-8 % |
| Si |
2.0 % Max |
| P |
0.40 % Max |
| S |
0.05 % Max |
| Size |
25-150 mm. Other sizes are also available on
request. |
|
| |
M-22,
M.I.D.C., HINGNA INDUSTRIAL AREA , NAGPUR 440 016 ,
INDIA
Ph: 91 712 232401/232402/237065, Fax: 91 712 237223
(Email : info@mpmindia.com) |