| |
SANDIRON |
| |
Description:
Sandiron is a pre-blend
of high quality Bentonite & lustrous carbon producing
Carbonaceous Additives, for use as clay binder as well
as carbonaceous additive for improving casting
surface finish in green sand molding systems
in foundries. |
| |
Functions:
Pre-blends of Bentonite & lustrous carbon producers
are preferred modes of dosing both these essential additives
in a single measure in the green sand
molding process in foundries. Pre-blends are specially
preferred by those foundries where castings of near standard
configuration and sand to metal ratios are cast in foundries
having highly automated molding lines and sand plants.
Pre-blends such as SANDIRON, while imparting
ease of use as single dose additives,
require careful monitoring where frequent changes of patterns
are necessitated. Here a close working relationship between
the pre-blend manufacture & the user foundry is recommended. |
| |
Advantages
Acts as a single shot additive for both green strength
and surface finish.
High green compression strength.
Excellent peel of sand.
Good anti scabbing properties.
Can also be used for non-ferrous castings, like copper
based alloys. |
| |
Packing
& Storage
SANDIRON is packed in 50 kg HDPE Bags and should be stored
in moisture free,
covered conditions. |
| |
For Further Information
on SANDIRON
General Specifications
Suggested sequence of additions
Tailor-made solutions by SANDIRON to suit your
quality parameters.
For any further questions or product application information,
we are at your service. |
| |
|
