| |
MINCOAT |
| |
| MINCOAT
is a range of Hydro based coatings in paste form for cores
and moulds. |
|
Application:
MINCOAT is suitable for the moulds and cores made from
Resin Bonded sand.
MINCOAT range of coatings, find application in Grey Cast
iron, Ductile iron, Steel, and Non Ferrous castings.
MINCOAT wash can be applied by dipping, brushing and spraying.
MINCOAT is formulated to avoid veining, Metal Penetration
& Sand Burnt-On. |
| |
After
Treatment:
Dry by hot air blower or in oven. |
| |
Advantages:
MINCOAT is in paste form.
MINCOAT gives uniform and consistent coating, ensuring
clean casting & reduces casting cleaning cost. |
| |
Precautions:
When coating by dipping application ensure clean dip tank.
Dry cores by hot air or in an oven. |
| |
Handling:
MINCOAT Keep away from the direct heat and sunlight.
MINCOAT has a shelf life of 60 Days if stored in cool
and dry place. |
| |
| Product |
Color |
Filler |
Application |
MINCOAT–AGF |
Red
|
Mixed Refractory Graphite; Feo |
For CI, SGI, Non ferrous automotive
casting- medium / small sized cores |
MINCOAT–AG |
Grey |
Aluminium Silicate, Graphite |
Small & Medium cores in
automobile castings. |
MINCOAT–CG |
Red |
Ceramic, Graphite |
Small & Medium intricate
cores-Blocks & Head of automobile. |
MINCOAT–G |
Grey |
Graphite |
Grey Cast Iron, Ductile Iron,
Non ferrous casting. |
| MINCOAT–ZS |
Cream |
Zircon Silicate |
Ferrous as well as non ferrous
castings.
|
|
| |
| NOTE:
All information provided in this sheet is to the best
of our present knowledge. No warranties or guarantee of
any type or extent are intended or implied and the company
accepts no liability for any loses or damages, consequential
or otherwise. Any claim arising out of use of the product
will be limited to replacement of material only. |
| |
|
